If you are experiencing an issue with your ice maker not ejecting ice, there’s no need to rush to call the appliance repair service. First, do some ice maker troubleshooting. Here are a some common issues to look out for in regards to your ice maker will not eject and a few ice maker repair and maintenance tips to get the most out of it.
Ice maker machine make it faster and more efficient for you to make your own ice. Over the years, ice maker have become more innovative.
Now, this is the least of your worries especially since you can make easy ice anytime you want. This is perfect now that summer is just around the corner. But since you will be using the ice maker most of the time, you need to be aware of the right way of using the machine.
Unlike diamonds, ice maker does not last forever. There will come a time when it needs to be repaired. In this unfortunate situation, you have two options: bring the unit to a professional repair service or DIY ice maker repair.
Should you do the necessary ice maker repair or should you hire someone who you can trust to take on the job? Both alternatives have pros and cons. It just depends on if you think you are really knowledgeable in repairing or fixing the problems. The following alternatives have their pros and cons.
- Job done in a repair service is done by expert; therefore reliable.
- Do-it-yourself repair saves money for there are manuals as guides.
- Job done in repair service is expensive.
- Do-it-yourself repair is done by a non-expert; therefore, unreliable.
Before you call a repair service, try to do your own troubleshooting and DIY repair guide. There is a good guide on how to repair ice maker that does not eject ice. If your ice maker doesn’t make ice, you can check out these do-it-yourself ice maker repairs before calling a professional.
There are ice maker troubleshooting tips that you can find on the product manual. You can get the valuable information that you need to repair the problem without having to worry about additional repair costs. Troubleshooting and repairing an ice maker not ejecting ice is a jobs that do-it-your-self can handle with a little bit of guidance.
Troubleshooting an Ice Maker Not Ejecting Ice
A cube has become lodged
An ice cube has lost its way. Directly point a hair dryer at the ice maker, on high heat, for about 20 minutes. The lodged cube will melt the ice and the maker works again.
Freezer temperature is over 10 degrees Fahrenheit
Setting the freezer temperature in between 0 and 5 degrees Fahrenheit is the right temp for ice maker to work properly. If the temp is too high, condenser coils of the fan do not work properly. Check if frost has accumulated on the evaporator coils for this will cause part of the defrost system to fail.
Defective water inlet valve
It is the electrically-controlled water inlet valve that supplies water to the dispenser and ice maker. If water inlet valve is defective, or if it has insufficient pressure, no water is allowed to flow through so no ice. The water pressure of the valve must be at least 20 psi. If the pressure in the water inlet valve is insufficient and the ice maker is not filled fill with water to make ice, then it is time for water inlet valve must be replaced.
Time to replace Ice maker assembly
Many ice maker components are not sold separately so if a part of the ice maker assembly is defective, the entire component must be replaced. Check the water inlet valve, water line, and fan. The proper time to replace the ice maker assembly is when it continues to stay at 15 degrees Fahrenheit.
Defective icemaker module
Ice maker won’t make or dispense ice when the module is defective. Make sure that the bail arm is in the down position or the on/off switch is in the on position. Check the modules’ ejector blades to ensure that no ice cubes are stuck in the blades. There is the usual tests point that the technician use to diagnose problems with the module.
House supply water pressure is low
Insufficient water pressure at home will not eject ice since 20 psi of water is required for inlet valve to function properly. Check to determine if the pressure is at around psi of 20.
Clogged water filter
The flow of water to the dispenser is restricted when water filter is clogged; so ice maker cannot work properly. You have to replace water filter every six months to properly maintain flow of water, as well as insuring its quality.
Defective icemaker mold thermostat
The temp of the ice tray is monitored by the thermostat; as soon as the proper temp is reached by the mold, ice cubes will be ejected and and the ice mold is refilled with water. In a defective thermostat, ice maker will stop making ice. Use a multimeter to test its continuity. A replacement is needed when thermostat mold does not show continuity.
Icemaker switch is defective
It is also possible that the ice maker switch got turned off by accident; but after the switch of the ice maker is switch on and it still isn’t working, replace it.
The most typical problem that occurs in an ice maker is failure to make ice. You can learn how to troubleshoot your ice maker and to do ice maker repair since you can simply follow instructions in the manual. But before diving into dealing with ice maker problems, you must have a better understanding of what might be wrong by using these tips.
Know that safety is still one of most important considerations when troubleshooting ice maker not ejecting ice. Make sure that before you do anything else, unplug the ice maker first. Second, familiarize yourself with the parts and the technical aspects of your ice maker.
If you think you can do the DIY repair then there is no harm in trying to fix the ice maker not ejecting ice problem. But if you are not sure, it is definitely important that you look for professional help. Only a repair expert can guarantee you the solutions for your ice maker problems.